Update - Sony LKRA-009 Installation Manual

5-1-4. Update

Apply the update package in the following order.
For the update procedure, refer to Section 4-2 in the Maintenance Manual of the Digital Cinema Projector
Package SRX-R515P/R510P.
1. Apply Unified Update Manager (UUM).
2. Apply the module to make the system to be recognized as the dual system.
3. Apply the module to update the software to the latest version.
Screen example
Turn the power of the projector off and on
When the server is started, the projector restarts and enters the standby mode while "Initializing" is dis-
played in the status message display window located on the back side of the main projector and sub-
projector. When the projector enters the standby mode, turn off and on the power switch on the back side
of the main projector and sub-projector.
n
After performing the update of module, be sure to turn off and on the power at the end of the update.
5-4 (E)
Digital Cinema Dual System