Mmc: 201 Change Customer Passcode - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 201
DESCRIPTION:
Used to change the passcode allowing access to MMC 200 Open Customer
Programming from its current value.
NOTE: The passcode is four digits long. Each digit can be 0-9. The current (old)
passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION
1. Press TRANSFER 201
Display shows
2. Enter new passcode via dial keypad
(maximum four digits).
3. Verify new passcode via dial keypad.
Passcode verified (go to step 4)
OR
Passcode failure.
Return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: PASSCODE = 1234
RELATED ITEMS: MMC 200 OPEN CUSTOMER PROGRAMMING
CHANGE CUSTOMER PASSCODE
DISPLAY
CUST. PASSCODE
NEW CODE:_
CUST. PASSCODE
NEW CODE:
CUST. PASSCODE
VERIFY
CUST. PASSCODE
VERIFY
CUST. PASSCODE
VERIFY
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
:
:SUCCESS
:FAILURE