Mmc: 217 Station Pair - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 217
DESCRIPTION:
Assigns a secondary station to a keyset. This secondary station can be a keyset. a
single line port, an AOM or ITP phone. It is recommended that the extension
number for the secondary station should be blocked from receiving direct intercom
calls in MMC 314 to prevent the secondary station being accidentally called. The
secondary station assumes the COS (Class of Service), LCR COS, and DND
attributes of the primary station.
Note:
1. If the COS is changed for either station in MMC 301 the change affects both
stations.
2. Secondary stations when dialed will also ring the primary extension.
3. Message from secondary extension will display that (secondary) extension
numbers. Callback to extension (secondary) as well.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 217
Display shows
2. Enter the primary station number via dial
keypad (e.g. 201)
OR
Press UP or DOWN to select and press
RIGHT soft key.
3. Enter the secondary station number via dial
keypad (e.g. 205)
OR
Press UP or DOWN to select and press
RIGHT soft key.
Home Page
PROGRAMMING
PART 2 JUNE 2006
STATION PAIR
DISPLAY
[201] PRIMARY
SECONDARY:NONE
[201] PRIMARY
SECONDARY:NONE
[201] PRIMARY
SECONDARY:205
Table of Contents