Samsung OfficeServ 7400 Technical Manual page 221

OfficeServ 7400
TECHNICAL MANUAL
NOTES: Calls to a group do not follow the call forwarding instructions of any
stations in the group.
I. GRP AUTOANS: OFF When this option is set to ON, intercom calls to the
group will Auto Answer/Voice Announce if the station is programmed for Auto
Answer/Voice Announce in MMC 103. CO calls will follow the AUTO ANS CO
setting in MMC 110 for a group member in addition to the group members
setting in MMC 103.
FEATURE KEYS
0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4 NEXT PORT
5 MEMBER
6 NXT HUNT
RING MODES
0 SEQUENTIAL
1 DISTRIBUTED
2 UNCONDITIONAL All the stations listed in the group will ring. Busy stations will
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
MMC: 601
Group type
(Normal, VM/AA, UCD, VMUCD, BI-VMS, MESSAGE, SO STN)
Ring mode (Sequential, Distributed or Unconditional)
Overflow time (000 - 250 secs.)
Group transfer time (000 - 250 secs.)
Group or station number (e.g. group 502, station 221, 244)
Group members (e.g., station 202, 225, 231)
Hunt time (000 – 250 secs)
The first idle station listed in the group will ring. If the first is
busy, the next idle station will ring.
The first call will ring the first station listed in the group. The
next call will ring the next station listed in the group.
receive off-hook ring. MAXIMUM 32 STATIONS RINGING.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006