Locking Your Phone; Change Your Passcode - Samsung iDCS500 User Manual

Samsung iDCS500

LOCKING YOUR PHONE

Using this option, you can allow or disallow incoming and outgoing calls from your
phone while absent from your desk. There are three possible options: Unlocked,
Locked All and Locked Out.
Unlocked
Locked All
Locked Out
1. Lift the handset and dial 15 then 100.
2. Dial your 4-digit extension passcode.
3. Dial 1 to set the phone to Locked Out
OR
Dial 2 to set the phone to Locked All.
4. When you hear system dial tone, hang up.
UNLOCKING YOUR PHONE
n
1. Lift the handset and dial 15 then 100.
2. Dial your 4-digit extension passcode.
3. Dial 0 to set the phone to Unlocked.
4. When you hear system dial tone, hang up.

CHANGE YOUR PASSCODE

By default, your extension passcode is 1234. You can change this passcode to any
4-digit number. You may be required to do this in order to use some special fea-
tures.
1. Lift the handset and dial 15 then 101.
2. Dial your existing (old) passcode.
3. Dial a new passcode (must be four characters, e.g. 3456). You can use num-
bers 0–9.
4. When you hear confirmation tone, hang up.
Phone can be used without restriction.
Prevents phone from making or receiving calls.
Restricts the phone from accessing an outside line and making a
call. Calls can still be received.
–23–
SLT User Guide