Mmc: 414 Assign Caller Id/Ani Trunks - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 414
DESCRIPTION:
Allows the system administrator or technician to activate Caller ID or ANI on a per-
trunk basis. Activating Caller ID or ANI will delay the incoming ring indication at the
operator by two ring cycles to allow for the collection of the calling party data.
Each trunk has the following options:
0 NORMAL
1 CID TRUNK
2 ANI TRUNK
NOTE: ANI information can be received only on digital (T1) trunks.
ANI is programmed for use on a trunk group basis.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 414
Display shows
2. Dial trunk number (e.g. 705)
OR
Press UP or DOWN to select trunk
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL.
3. Dial 0, 1 or 2 to change options
OR
Press UP or DOWN to select an option
Press RIGHT soft key to enter and
return to step 1.
ASSIGN CALLER ID / ANI TRUNKS
This is not a Caller ID trunk.
This is a Caller ID trunk.
This is an ANI trunk.
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
[701]CID TRUNKS
NORMAL
[705]CID TRUNKS
NORMAL
[ALL]CID TRUNKS
?
[705]CID TRUNKS
CID TRUNK
[705]CID TRUNKS
ANI TRUNK
Table of Contents