Samsung OfficeServ 7400 Technical Manual page 87

OfficeServ 7400
TECHNICAL MANUAL
58 SMDR AUT2 ACC:OFF
59 IPNW REAL RB:OFF
60 TRK AUTO MOH:OFF
61 TRSF VT KEY:ON
62 PAIR NO RING:OFF
63 DISA NO ACT:OFF
64 ICM AUTO HOLD:OFF
65 DTMF to SO: OFF
66 STN HOLD PICK: OFF
67 AREA DELETE
68 ELCR DIAL TONE: OFF
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
MMC: 210
When using authorization codes over 4 digits (maximum
10) set this option to ON and the authorization code will
print in the Account Code field of SMDR. When set to OFF
only the first four digits of any authorization code will
appear in the AUTH field of SMDR.
When set to OFF the Ring Back tone on network calls will
be generated from the originating MCP card. When set to
ON, the distant MCP card provides both Ring Back tone
on network calls.
Turn this option ON to have the system immediately
answer an incoming call and play the AA (Auto Answer)
source set in MMC 408.
Turn this ON to make the TRANSFER key act like a VT
key. It will buffer digits dialed then send to Voice Mail after
hanging up. Example: While on a call press TRANSFER,
dial the Voice Mail Group number, then mailbox number,
then hang up. OFF = normal TRANSFER key operation.
When set to OFF a call to a busy station paired with
another will ring at the paired station. Turn this ON and a
call to a busy station paired with another will not ring at
the paired station.
Turn this ON to disconnect a caller to the DISA line when
they take no action before the DISA NO ACTION TIME in
MMC 501.
Set this option to ON to have intercom calls follow AUTO
HOLD ON/OFF option in MMC 110.
NOT USED IN THE USA
If ON intercom calls that are on HOLD can be picked up
by other stations.
FUTURE USE
When ON, activates special dial tone when accessing
E-LCR.
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006