Samsung OfficeServ 7400 Technical Manual page 102

OfficeServ 7400
TECHNICAL MANUAL
CID TO SLT:
NO RCL FLASH:
RBK STN NAME:
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 300
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
OR
Press ANS/RLS for all and press RIGHT soft
key to move cursor.
3. Press UP or DOWN to select feature and
press RIGHT soft key to move cursor.
4. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN to select and press
RIGHT soft key.
MMC: 300
System provides Caller ID to SLT. OfficeServ 7400 requires
an CRM or RCM2 board.
If ON and an SLT hook flashes and does not dial and hangs
up, then the call will disconnect. If OFF the call will recall.
The same applies if a keyset transfers and hangs up without
dialling a station. Typically not used in the US market.
If ON, the called station's name is displayed while ringing
(Intercom calls only).
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
[201] CUS.ON/OFF
ACCESS DIAL :ON
[205] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :OFF
Table of Contents