Mmc: 224 Wape-Up Aa - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 224
DESCRIPTION:
This MMC is designed to enhance the Wake Up feature. The system will play a
recorded Prompt when a Wake Up call is answered by the user. The Wake Up
Announcement feature will require that a SVMi-20E be installed in the system and
will access the customized Wake Up Prompt (001-9999) that has been recorded on
the SVMi-20E as a Prompt. The end user will record this Prompt and have the ability
to change it when desired using the TUI System Administrator or GUI Voice Studio.
The Wale Up PMT will have no default Prompt assigned to it.
This feature offers a busy overflow destination. In the event that the AA group is
busy, the guest would receive MOH upon answering the wake up call.
This MMC has three options:
Option
AA GROUP (STATION GROUP)
MESSAGE NO (PROMPT NO.)
GROUP BUSY
* Message #5049~5064 have pre-recorded Auto Attendant (AA) default messages
programmed and can be over-written. Do not use this range of messages for
Wake-Up messages if you want to preserve the AA messages.
Home Page
WAKE-UP AA
Description
Determines which station group will be
connected when a Wake Up call is
answered. This destination must be any
station group assigned as "VMSUCD".
Determines which message will be played
when a Wake Up call is answered. This
destination can be a custom recorded
message. (Message #1000~9999)*
Determines which tone source will be
connected when AA group members are
all busy. This destination can be a NONE,
TONE or extern music on hold.
If NONE is set then dial tone is connected,
if TONE is set then hold tone is
connected.
Table of Contents
PROGRAMMING
PART 2 JUNE 2006