Samsung OfficeServ 7400 Technical Manual page 297

OfficeServ 7400
TECHNICAL MANUAL
3. Enter selected key number (e.g., 18)
OR
Press UP or DOWN key to select key number.
Press RIGHT soft key to move cursor.
4. Using above chart, press dial pad key
number to make selection
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance cursor to
step 5 to enter extender if required or to
return to step 2.
5. If required, enter extender (e.g.,03)
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to return to step 2.
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SEE BELOW
RELATED ITEMS: MMC 107 KEY EXTENDER
MMC 720 COPY KEY PROGRAMMING
MMC 721 SAVE STATION KEY PROGTRAMMING
• DCS KEYSETS
Default 24 Button Keyset with or without Display
01:CALL1 02:CALL2 03:NONE
07:NONE 08:NONE
13:NONE 14:NONE
19:CONF 20:SPD
01:CALL1 02:CALL2 03:NONE
07:CONF 08:SPD
MMC: 722
04:NONE
09:NONE 10:NONE
15:NONE 16:NONE
21:LNR 22:PAGE
Default 12 Button Keyset
04:NONE
09:LNR 10:PAGE
Home Page
PROGRAMMING
PART 2 JUNE 2006
[201] KEY PROG.
18:NONE →_
[201] KEY PROG.
18:NONE →GPIK_
[201] KEY PROG.
18:NONE →GPIK03
05:NONE 06:TG9
11:NONE 12:NONE
17:NONE 18:NONE
23:CBK 24:MSG
05:NONE 06:TG9
11:CBK 12:MSG
Table of Contents