Samsung OfficeServ 7400 Technical Manual page 40

OfficeServ 7400
TECHNICAL MANUAL
12 CID REVIEW ALL
13 SECURE OHVA
NOT FOR USA
14
AUTO ANS CO
15
ENBLOCK 2LCD
16
STN NO RING
17
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 110
Display shows
2. Dial the option number from above list
(e.g., 4)
OR
Press UP or DOWN to select the option and
Press the RIGHT soft key to move the cursor.
3. Press UP or DOWN to select ON or OFF
Press the left or right soft key to return to
step 2
MMC: 110
FEATURES
If this setting is set to OFF the CID review
list will only store CID information for calls
that were not answered at the station and
reject the information for calls that were
answered. When set to ON all calls will be
stored in the list.
When set to OFF an OHVA will be heard
through the keyset speaker rather than the
handset.
When set to ON CO lines programmed to
ring that keyset directly will auto answer if
the keyset is programmed for auto answer
in MMC
For ITP Phones with 2 Line Display
Set to ON will require user to press SEND
button to make a call, it works like a cell
phone. Enblock dialing must be enabled in
MMC
When ON all incoming calls will not ring at
stations.
Home Page
DESCRIPTION
103.
861.
DISPLAY
[201] STN ON/OFF
AUTO HOLD
[201] STN ON/OFF
HOT KEYPAD :OFF
[201] STN ON/OFF
HOT KEYPAD :ON
Table of Contents
PROGRAMMING
PART 2 JUNE 2006
:OFF