Mmc: 606 Assign Speed Block - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 606
DESCRIPTION:
Provides a means of adding or deleting speed dial blocks to the system or an
individual keyset. With the ability to delete a block or blocks or speed dial, it will not
be necessary to waste these on such items as voice mail, DPIMs or stations that do
not require the ability to use speed dial. The Free List will show how many bins are
left to be assigned. All entries refer to blocks of 10 numbers or bins.
A library of up to 2000 speed dial numbers may be allocated as needed on a
OfficeServ 7400 system. These total library of numbers is split between the System
Speed Dial list with the balance being shared between stations. The system list can
be set for either 500 or 950 numbers using MMC 861. Each station can have up to
50 numbers. Speed dial numbers are assigned in blocks of ten. Each speed
number may contain up to 24 digits.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
TRANSFER
ACTION
1. Press TRANSFER 606.
Display shows. This indicates 20 blocks of 10
(200 numbers) are available in the free list and
20 blocks of 10 (200 numbers) are assigned
to the system speed dial list.
2. Press RIGHT soft key to advance to next line.
3. Make a selection of SYSTEM or EXT
using UP or DOWN key.
Press RIGHT soft key to advance cursor.
ASSIGN SPEED BLOCK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear entry
Used to exit programming
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
FREE LIST:20
SYSTEM:20
FREE LIST:20
SYSTEM:20
FREE LIST:20
EXT201:1
Table of Contents