Mmc: 722 Station Key Programming - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 722
DESCRIPTION:
Allows the customizing of programmable keys on specific electronic keysets, AOM,
or 64 button module on the OfficeServ 7400 system. For keysets, buttons 1 and 2
are set as CALL buttons by default. For AOM's and 64 button DSS box's all buttons
are set as DS keys by default. Features are entered via dial pad keys by pressing
the dial pad number the required number of steps to select the feature. For
example, for OHVA, the number 6 is pressed three times. If the BOSS key is
required, press 2 for the first letter B and then use the UP or DOWN key to change
the selection from BARGE to BOSS.
COUNT
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRANSFER 722.
Display shows.
2. Enter selected station number (e.g., 205)
OR
Press UP or DOWN key to select station.
Press RIGHT soft key to move cursor.
STATION KEY PROGRAMMING
DIAL KEYPAD
1
AAPLAY BARGE
DICT
GPIK HLDPK
LCR
MMPA
PAGE REJECT
TG
WAKEUP XCHIN
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Home Page
PART 2 JUNE 2006
2 3
CALL
DICT FAUTO
IG
LCR LCR
NEW OHVA
SG
UA VM
WAKEUP
DISPLAY
[201] KEY PROG.
01:CALL1 →
[205] KEY PROG.
01:CALL1 →
Table of Contents
PROGRAMMING