OfficeServ 7400
TECHNICAL MANUAL
MMC: 846
DESCRIPTION:
[MMC846] is used to display the WIP-5000M information and set some parameters.
You can change USER ID, PASSWORD, and INSERT DGT.
No.
Parameter
0
REGISTERED
1
LOCATED
2
PHONE TYPE
3
WLI NUMBER
4
WBS
NUMBER
5
IP OFFSET
6
IP ADDRESS
7
MAC ADDR
8
USER ID
9
PASSWORD
10
INSERT DGT
ACTION
1.
Select the MMC number [846].
2.
Select a desired WIP-5000M number.
Or select a desired WIP-5000M number
using the [▼Volume▲] button, and press
[RIGHT] soft button to move the cursor.
Indicates whether the corresponding WIP-5000M is registered
Indicates whether the corresponding WIP-5000M is currently connected
to the system
Indicates the type of the corresponding WIP-5000M phone
Number of WLI connected to WBS24 in service in the section where
WIP-5000M is being used
Number of WBS24 in service in the section where WIP-5000M is being
used
Location of the IP pool where the IP assigned to WIP-5000M is located
IP address assigned to the registered WIP-5000M
MAC address of the registered WIP-5000M
Sets ID by the WIP-5000M user
Sets password by the WIP-5000M user
If the number of digits you pressed when originating a call in WIP-5000M
is more than 5, the set INSERT DGT is inserted before the number you
pressed.
However, the number you pressed should not be C.O. Line number, C.O.
Line group number, LCR, network LCR, or number starting with the
function code
Home Page
PART 2 JUNE 2006
WIP INFO
Description
DISPLAY
[3301] REGISTERED
NO
[3301] REGISTERED
NO
Table of Contents
PROGRAMMING