Specifications; Models And Their Standard Specifications - Toshiba TOSVERT VF-S9 Instruction Manual

12. Specifications

12.1 Models and their standard specifications

Standard specifications
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA)
Note 1)
Rated output current
(A)
Note 2)
Rated output voltage
Note 3)
Overload current rating
Voltage-frequency
Allowable fluctuation
Protective method
Cooling method
Color
Built-in filter
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA)
Note 1)
Rated output current
(A)
Note 2)
Rated output voltage
Note 3)
Overload current rating
Voltage-frequency
Allowable fluctuation
Protective method
Cooling method
Color
Built-in filter
Note) 1. Capacity is calculated at 220V for the 200V models and at 440V for the 400V models.
Note) 2. Indicates rated output current setting when the PWM carrier frequency (parameter F300) is 4kHz or less.
When exceeding 4kHz, the rated output current setting is indicated in the parenthesis. When the input power voltage of
the 400V class model exceeds 480V, it is necessary to further reduce the setting. The default setting of the PWM car-
rier frequency is 12kHz.
Note) 3. Maximum output voltage is the same as the input voltage.
±10% when the inverter is used continuously (load of 100%).
Note) 4.
0.2 0.4 0.75
2002PM 2004PM 2007PM 2015PM
0.6 1.3 1.8
1.5 3.3 4.8
(1.5) (3.3) (4.4)
Voltage + 10%, -15%
Self
cooling
Standard EMI filter
1-phase 200V
0.2 0.4 0.75 1.5
VFS9S-
2002PL 2004PL 2007PL 2015PL 2022PL 4007PL 4015PL 4022PL 4037PL 4055PL 4075PL 4110PL 4150PL
0.6 1.3 1.8 3.0
1.5 3.3 4.8 7.8
(1.5) (3.3) (4.4) (7.5)
3-phase 200V to 240V
60 seconds at 150%, 0.5 seconds at 200%
3-phase 200V to 240V – 50/60Hz
, frequency ±5%
Voltage +10%, -15%
Note 4)
IP20 Enclosed type (JEM1030)
Self
Forced air-cooled
cooling
Munsel 5Y+8/0.5
High-attenuation EMI filter
Specification
3-phase 200V
1.5 2.2 3.7
VFS9-
2022PM 2037PM 2055PL
3.0 4.2 6.7
7.8 11.0 17.5
(7.5) (10.0) (16.5)
3-phase 200V to 230V
60 seconds at 150%, 0.5 seconds at 200%
3-phase 200V to 230V – 50/60Hz
, frequency ±5%
Note 4)
IP20 Enclosed type (JEM1030)
Forced air-cooled
Munsel 5Y+8/0.5
High-attenuation EMI filter
Specification
2.2 0.75 1.5 2.2
4.2 1.8 3.1 4.2
11.0 2.3 4.1 5.5
(10.0) (2.1) (3.7) (5.0)
3-phase 380V to 500V
60 seconds at 150%, 0.5 seconds at 200%
3-phase 380V to 500V – 50/60Hz
Voltage +10%, -15%
IP20 Enclosed type (JEM1030)
Forced air-cooled
Munsel 5Y+8/0.5
High-attenuation EMI filter
L-1
E6580757
5.5 7.5 11 15
2075PL 2110PM 2150PM
10 13 21 25
27.5 33 54 66
25.0 (33) (49) (60)
Standard EMI filter
3-phase 400V
3.7 5.5 7.5 11
VFS9-
7.2 11 13 21
9.5 14.3 17.0 27.7
(8.6) (13.0) (17.0) (25.0)
, frequency ±5%
Note 4)
15
25
33
(30)
12