Toshiba TOSVERT VF-S9 Instruction Manual page 137

* The converts the following parameter settings:
• A display Current monitor display
Motor electronic thermal protection level 1/2
DC braking current
Stall prevention level
Small current detection level
• V display Voltage monitor display
Torque boost 1/2
• Free unit Frequency monitor display
Frequency-related parameters
6.16.3 Changing the status monitor display format
: Standard monitor display selection
• Function
This parameter specifies display format while power is on.
Changing the display format while power is on
When the power is on, the standard monitor mode displays the operation frequency (default setting) in the
format of " " or "
. This new format, however, will not display an assigned prefix such as "
• Standard monitor mode ⇒ Standard monitor display selection (
Title
Standard monitor display se-
lection
". This format can be changed to any other monitor display format by setting
Function
0: Operation frequency (Hz/Free unit)
1: Output current (%/A)
2: Frequency command (Hz/Free unit)
3: Inverter rated current (A)
4: Inverter overload factor (%)
5: Output power (%)
F-53
( ),
,
∼
, , , ,
∼
, ,
, , ,
, , ,
∼
,
" or "
Adjustment range
E6580757
,
, ,
, ,
, ,
6
".
)
Default setting
0