Toshiba TOSVERT VF-S9 Instruction Manual page 136

1) Display in percentage terms
An example of setting for displaying the motor speed or load speed
Set
The value obtained by multiplying the displayed frequency by the
lows:
Value displayed = Monitor-displayed or parameter-set frequency ×
1)
6
2)
Output current:
Input (DC) voltage:
to either " " or " ".
Displaying the motor speed
To switch the display mode from 60Hz (default setting) to 1800min-1 (the rotating speed of the 4P mo-
tor)
Displaying the speed of the loading unit
To switch the display mode from 60Hz (default setting) to 6m/min-1 (the speed of the conveyer)
Note: This parameter displays the inverter output frequency as the value obtained by multiplying it by a
positive number. Even when the actual speed of the motor changes according to the particular
changes in load, the output frequency will always be displayed.
2) Display in amperes/volts
F-52
E6580757
Output current:
Input (DC) voltage:
(vale of changing to AC)
-set value will be displayed as fol-