Toshiba TOSVERT VF-S9 Instruction Manual page 149

(Continued)
Item displayed
CPU version
Memory version
Note 4
Past trip 1
Note 4
Past trip 2
Note 4
Past trip 3
Note 4
Past trip 4
Cumulative
Note 5
operation time
Torque current
PI feedback
Inverter load factor
PBR overload
factor
Output power
Default display
mode
8
Note 1: Press the
Note 2: With the current unit selection parameter or voltage unit selection parameter, you can choose between
Note 3: The input (DC) voltage displayed is 1/ 2 times as large as the rectified dc input voltage.
Note 4:
Note 5: The cumulative operation time increments only when the machine is in operation.
Key LED
operated display
or key to change items displayed in the status monitor mode.
percentage and ampere (A) for current or between percentage and volt (V) for voltage, respectively.
is displayed to show the absence of error.
Communi-
cation No.
FE08 The version of the CPU is displayed.
FE09 The version of the memory mounted is displayed.
Past trip 1 (displayed alternately at 0.5-sec. inter-
FE10
vals)
Past trip 2 (displayed alternately at 0.5-sec. inter-
FE11
vals)
Past trip 3 (displayed alternately at 0.5-sec. inter-
FE12
vals)
Past trip 4 (displayed alternately at 0.5-sec. inter-
FE13
vals)
The cumulative operation time is displayed. (0.01
FE14
corresponds to 1 hours.)
FE20 The torque current is displayed in %.
The PI feedback value is displayed.
FE22
(Unit: processed amount)
FE26 The inverter load factor is displayed in %.
The overload factor of the braking resistor is dis-
FE28
played in %.
FE30 The inverter output power is displayed in %.
The operation frequency is displayed
(during operation).
H-2
E6580757
Description