<<Sample sequence diagram 2: Adjustment with pulse signals>>
RUN command
Incrementing
(UP) signal
Decrementing
(DOWN)signal
Set frequency
clearing signal
Upper limit
frequency
OH
Simultaneous input
6
Storage of the set frequency
Frequency adjustment range
Minimum unit of frequency adjustment
Z
• If input clearing signal and decrementing signal at the same time, clearing signal is allowed.
• If input incrementing signal and decrementing signal at the same time, difference of both signal is re-
sponded.
Ex. If
>
frequency (
Set parameter
=
to select automatic storage of the frequency setting.
The frequency can be set from
value will be set as soon as the set frequency clearing function (function number: 43, 44) is entered
from the input terminal.
If the unit selection parameter
rameter
= 1.00, the output frequency can be adjusted in steps of 0.01Hz.
-
) increase.
(lower limit frequency) to
(upper limit frequency). The
= 2 (free unit selection enabled) and the free unit selection pa-
F-16
E6580757