Table of Contents
Advertisement
APPENDICES
Please use the processing method and the processing treatment device that exists in the connector
when you fix the code part of the SSCNET
It must not cut squarely when you cut the code part of the SSCNET
not be made smooth, and garbage etc. must not adhere.
The damage etc. must not adhere to the optical code part when you peel off the film of the cable of the
SSCNET
cable.
The transmission of light is obstructed when dirt adheres to the edge side in the code part of the
SSCNET
cable (point) and it causes the malfunction. Please give dirt to me with the unwoven cloth
wiper etc. when becoming dirty and give a wipe to me. Please do not use the solvent such as alcohol.
Please do not add impossible power to the connector of the SSCNET
When incinerating optical cable (cord) used for SSCNET
gas which is corrosive and harmful may be generated. For disposal of optical fiber, request for
specialized industrial waste disposal services who has incineration facility for disposing hydrogen
fluoride gas or hydrogen chloride gas.
CAUTION
!
cable to the connector.
, hydrogen fluoride gas or hydrogen chloride
Appendix - 31
MELSEC-Q
cable, the cutting edge side must
cable.
Advertisement
Table of Contents
