Table of Contents
Advertisement
12 CONTROL SUB FUNCTIONS
Monitor item
Torque limit stored
Md.35
value
Refer to Section 5.6 "List of monitor data" for information on the setting details.
The following table shows the "
buffer memory address.
Monitor
value
The "torque limit value" valid at that time is
stored. (
REMARK
•
Parameters are set for each axis.
•
It is recommended that the parameters be set whenever possible with GX
Configurator-QP. Execution by PLC program uses many PLC programs and
devices. The execution becomes complicated, and the scan times will increase.
Md.35
Torque limit stored value" of the
Storage details
Pr.17
,
Pr.54
,
Cd.22
12 - 28
MELSEC-Q
Buffer memory address
Axis
Axis
1
2
826 926 1026 1126
, or Cd.101 )
Axis
Axis
3
4
Advertisement
Table of Contents
