Configuring Gpon Ftth Layer 2 Multicast Service On The Nms - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
----End
Result
Check whether the telephone functions properly. Connect two common telephones phone 1 and
phone 2 to two TEL ports on the ONT and test the dialing between phone 1 and phone 2. In
normal cases:
l
l
l
l
3.2.6 Configuring GPON FTTH Layer 2 Multicast Service on the
NMS
This topic describes how to configure the multicast service when an ONT is connected to an
OLT through a GPON port.
Context
For details of the data plan, see Data Plan.
Example Network
l
l
l
l
Issue 02 (2011-12-08)
– Auth User Name: 88001235@softx3000.huawei.com
– Auth Password: iadtest2
c. Click OK. In the dialog box that is displayed, click OK. The configurations take
effect without the requirement of resetting the ONT.
The caller hears the dialing tone after taking the phone off the hook.
When the caller dials the telephone number of the callee, the phone of the callee rings
successfully, and the caller hears the ring back tone.
The caller and the callee communicate with each other successfully.
After the callee hangs up, the caller hears the busy tone.
The ONT is connected to the OLT in Layer 2 mode.
The OLT uses IGMP proxy, which is a Layer 2 multicast protocol.
The IGMP version of the multicast VLAN is IGMPv3.
Multicast programs are configured statically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
94