Configuring The Gpon Ftth Voip Service (Sip Protocol) On The Olt Cli - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
srvprofile-id 10
ont alarm-profile 1 1 profile-id 1
ont alarm-profile 1 2 profile-id 1
quit
traffic table ip index 9 cir off priority 6 priority-policy tag-In-Package
service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
queue-scheduler wrr 10 10 20 20 40 0 0 0
cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7
save
3.3.5 Configuring the GPON FTTH VoIP Service (SIP Protocol) on
the OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.
Service Requirements
l
l
l
l
l
Table 3-8 Data plan
Item
OLT
Issue 02 (2011-12-08)
The ONT is connected to the SIP server through SIP.
The ONT obtains the IP address through DHCP.
Two phone sets are connected to two TEL ports of the ONT respectively, and calls can be
made between two phone sets.
Users of phone sets under different ONTs can call and communicate with each other.
The DBA mode of the VoIP service is assured bandwidth + maximum bandwidth, and no
rate limitation is performed on the upstream and downstream traffic.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
S-VLAN ID: 200
S-VLAN type: smart VLAN
Upstream port: 0/19/0
C-VLAN ID: 20
3 Configuration
167