Huawei EchoLife HG8110 Service Manual page 348

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
Parameter
Start Number of RTP
TID
Width of RTP TID
Number
Signaling Port
Media Port
Region
Advanced Interface configuration
Fax Transmode
Fax Switchmode
Profile Index
Software Parameters
Start Negotiate Version
Enable Echo
Cancellation
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the start number of the suffix of the ephemeral
termination. The default value is 0.
Indicates the length of the suffix of the ephemeral
termination. The default value is 6.
Indicates the signaling WAN port used for connecting the
VoIP terminal to the MGC server.
Indicates the WAN port of the voice media streams. When
the name of the media port is empty, it indicates that the name
of the media port is the same as that of the signaling port.
Indicates the country code.
Indicates the fax mode, including pass-through and T.38.
l Pass-through: The MG encodes the fax signals
transmitted by a fax machine according to the voice codec
(G.711), and then coverts such signals into the RTP data
packets for real-time transmission over an IP network.
l T.38: The MG, through ITU-T T.38, converts the T.30-
compliant fax signals transmitted by a fax machine into
the T.38 packets for transmission over an IP bearer
network.
Indicates the fax switching mode, including negotiation and
self-switch. The fax switching mode is selected according to
the customer requirements.
Indicates the control point parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Indicates the software parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Indicates the start version of the H.248 protocol for
negotiation. It is selected according to the softswitch. The
value range is 0 to 3, and the default value is 2.
l 0: Indicates that the negotiation is based on the profile
parameters.
l 1-3: Indicates the start version of the H.248 protocol for
negotiation.
Enables or disables echo cancellation. By default, echo
cancellation is enabled.
5 Web Page Reference
340