Huawei EchoLife HG8110 Service Manual page 153

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
a. Configure the IP address of the PC network adapter to be in the same network
segment as the IP address of the local maintenance Ethernet port of the ONT
(default: 192.168.100.1).
b. Open the Web browser, and enter the IP address of the local maintenance Ethernet
port of the ONT.
c. On the login window, enter the user name (default: telecomadmin) and password
(default: admintelecom) of the administrator. After the password authentication
is passed, the Web configuration window is displayed.
2. Configure the working mode of a LAN port.
a. In the navigation tree, choose LAN > LAN Port Work Mode. Select the check
box of LAN 1 and set LAN1 to work in the Layer 3 mode.
b. Click Apply to apply the configuration.
3. Configure parameters of a WAN port.
a. In the navigation tree, choose WAN > WAN Configuration.
b. In the right pane, click New. In the dialog box that is displayed, configure
parameters of a WAN port as follows:
– WAN Connection: Enable
– Service List: INTERNET (For configuring the Internet access service,
INTERNET or a combination containing INTERNET needs to be selected.)
– Mode: Route
– VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– 802.1p: 1
– IP Acquisition Mode: PPPoE
– NAT: Enable (NAT must be enabled to configure the Internet access service.)
– User Name: iadtest@pppoe, Password: iadtest (The user name and password
must be the same as the user name and password configured on the BRAS.)
– Binding options: LAN1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
145