Querying The Physical State Of A Pots Port - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Figure 4-7 PPPoE dialup emulation
Step 7 Click Start. After the test is complete, test results are displayed on the NMS.
----End

4.5.2 Querying the Physical State of a POTS Port

This topic describes how to verify whether a POTS port is in the normal state by querying the
physical state of the POTS port on the NMS.
Prerequisite
l
l
l
Procedure
Step 1 In the Physical Map navigation tree on the Main Topology tab page, double-click the target
OLT, or select the target OLT, right-click, and choose NE Explorer.
Step 2 In the navigation tree, choose GPON > GPON Management.
Issue 02 (2011-12-08)
The user is a user with the operator authority or higher.
The OLT and the NMS communicate with each other properly.
The NMS is able to discover an online ONT and VoIP service parameters are configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance and Troubleshooting
286