Huawei EchoLife HG8110 Service Manual page 204

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l
Issue 02 (2011-12-08)
For the service board that supports only four queues, the mapping between 802.1p
priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and
3 map queue 2; priorities 4 and 5 map queue 3; priorities 6 and 7 map queue 4.
9. Create a multicast VLAN and set the IGMP version.
Set the IGMP version of the multicast VLAN to IGMP v3.
huawei(config)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp version v3
This operation will delete all programs in current multicast vlan
Are you sure to change current IGMP version? (y/n)[n]: y
10. Select the IGMP mode.
Select the IGMP proxy mode.
huawei(config-mvlan1000)#igmp mode proxy
Are you sure to change IGMP mode?(y/n)[n]:y
11. Add an IGMP upstream port.
The IGMP upstream port is port 0/19/0 and works in the default mode, and protocol
packets are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
12. (Optional) Set the multicast global parameters.
In this example, the default settings are used for all the multicast global parameters.
13. Configure the program library.
Configure the IP address of the multicast program to 224.1.1.10, program name to
program1, IP address of the program source to 10.10.10.10.
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp program add name program1 ip 224.1.1.10
sourceip 10.10.10.10
14. Configure the right profile.
Configure the profile name to profile0, with the right of watching program 1.
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp profile add profile-name profile0
huawei(config-btv)#igmp profile profile-name profile0 program-name
program1 watch
15. Configure the multicast users.
Configure users of service ports 5 and 6 as multicast users and bind right profile
profile0 to the service ports.
huawei(config-btv)#igmp policy service-port 5 normal
huawei(config-btv)#igmp policy service-port 6 normal
huawei(config-btv)#igmp user add service-port 5 auth
huawei(config-btv)#igmp user add service-port 6 auth
huawei(config-btv)#igmp user bind-profile service-port 5 profile-name
profile0
huawei(config-btv)#igmp user bind-profile service-port 6 profile-name
profile0
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 5
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 6
huawei(config-mvlan1000)#quit
16. Save the data.
huawei(config)#save
Configure an optical network terminal (ONT) on the Web page.
Layer 3 bridge mode is used for connecting an ONT to the upper-layer device and
parameters of a WAN port must be configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
196