Configuring File Transfer Server - Huawei EchoLife HG850 Service Manual

EchoLife HG850
Service Manual
Step Operation
1 Ensure that the maintenance terminal and the HG850 are correctly
connected.
2 Select start > Run to display the Run text box.
3 Enter the Telnet command and the IP address of the public network of the
HG850 in the Run text box, for example, telnet 11.11.11.1.
4 Click OK to display the Telnet running dialog box. After the connection
with the HG850, the related information of the Telnet is displayed on the
dialog box.
5 Enter the correct user name and password. Then you can enter the
configuration environment. (The preset user name of the terminal is root and
the password is admin.)
Ping the public network address of the HG850 (such as ping 11.11.11.1). If the address
can be pinged through, it indicates that the connection between the maintenance and the
HG850 is established.
The IP address of the maintenance terminal may be not the same as that of the HG850.
Ensure that the two IP addresses can be pinged through by each other.
When you are configuring the HG850 through the Telnet, do not randomly change the IP
address of the HG850. If it is necessary to change the IP address, after the change, the
Telnet connection will be disconnected and you need log on again with the new IP
address to set up the connection.
Local Maintenance
The HG850 supports the local maintenance through the Lan interfaces.
The HG850 provides the maintenance IP address as 192.168.100.1. You can set the IP
address of the client in the same network segment of the maintenance IP address. You
can log on to the HG850 through Telnet.
Use the Ethernet cable to connect the maintenance terminal with the HG850. If the network
port indicators on the maintenance terminal and the HG850 are both on, it indicates that the
network connection is established.

2.3.2 Configuring File Transfer Server

The HG850 supports file transfer through FTP. To configure the FTP server, install the
client software of the FTP server.
Issue 02 (2007-05-30) Huawei Technologies Proprietary
2 Installation Guide
2-5