Huawei EchoLife HG8110 Service Manual page 141

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l
Table 3-5 Data Plan
Item
OLT
ONT
Prerequisite
l
l
l
Procedure
l
Issue 02 (2011-12-08)
The high-speed Internet access service adopts a bandwidth-ensured mode with the
maximum bandwidth 100 Mbit/s as the DBA profile and performs the 4 Mbit/s rate
limitation on both the upstream and downstream directions.
The OLT is connected to the BRAS.
Related configurations are performed on the BRAS according to the authentication and
accounting requirements for dialup users. For details about the configuration, see the
corresponding configuration guide.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
Configure the OLT.
1. Create a service VLAN and add an upstream port to it.
The VLAN ID is 100, and the VLAN is a smart VLAN, VLAN attribute is stacking.
Add upstream port 0/19/0 to VLAN 100.
huawei(config)#vlan 100 smart
huawei(config)#vlan attrib 100 stacking
huawei(config)#port vlan 100 0/19 0
2. (Optional) Configure upstream link aggregation.
In this example, a single upstream port is used. In the case of multiple upstream ports,
upstream link aggregation can be configured. For details, see Configuring Upstream
Link Aggregation.
3. Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm
profile.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Service VLAN ID: 100
Service VLAN type: Smart
Service VLAN attribute: stacking
Upstream port: 0/19/0
ONT IDs: 1 and 2
ID of the port on the ONT that is connected to the PC: 1
Type of the port on the ONT that is connected to the PC:
ETH
VLAN ID of the port on the ONT that is connected to the
PC: 10
3 Configuration
133