Huawei EchoLife HG8110 Service Manual page 182

Gpon terminal
Table of Contents

Advertisement

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
– VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– 802.1p: 6
– IP Acquisition Mode: DHCP
c.
Click Apply to apply the configuration.
3.
Configure parameters of the SIP-based voice interface.
a.
In the navigation tree, choose Voice > VoIP Interface Configuration.
b.
In the right pane, configure parameters of the SIP-based voice interface as follows
(other parameters use the default settings):
– Set Proxy Server Address below Primary Server to 200.200.200.200.
– Home Domain: softx3000.huawei.com
– Signaling Port: 1_VOIP_R_VID_20
– Region: CN – China
NOTE
l The parameters of the SIP-based voice interface must be consistent with the corresponding
configuration on the softswitch.
l If dual-homing is configured, Proxy Server Address below Secondary Server must be
configured.
l If Signaling Port is empty, the parameter value is the same as Media Port. If the upper-
layer network requires isolation of media streams from signaling streams, create different
traffic streams for the media streams and signaling streams on the OLT, create different
WAN ports on the ONT, and bind the created WAN ports to Media Port and Signaling
Port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration
174

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents