Huawei EchoLife HG8110 Service Manual page 347

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
Table 5-14 Parameters used for configuring a VoIP interface based on the H.248 protocol
Parameter
Primary Server
MGC Address
MGC Port
Secondary Server
MGC Address
MGC Port
General
MG Domain
MG Port
Device Name
MID Format
Digitmap Match Mode
RTP TID Prefix
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the IP address (provided by the ISP) of the primary
MGC server.
Indicates the ID (provided by the ISP) of the port used for
communication between the primary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
Indicates the IP address (provided by the ISP) of the
secondary MGC server.
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
Fill the domain name when Register Format is set to
DomainName, such as user.huawei.com.
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 2944.
Fill the device name when Register Format is set to
DeviceName.
Indicates the MG registration format. It can be the MG
domain name, IP address, or device name. The MG register
format must be the same as the register format provided by
the ISP.
Indicates the digitmap matching mode, including Min and
Max.
l Min: If the dialed character string matches a digitmap
scheme, the system immediately reports the number to
the softswitches.
l Max: If the dialed character string matches a digitmap
scheme, the system does not immediately report the
number to the softswitches but starts the short timer. If a
user does not continue dialing digits, the system reports
the number to the softswitches after the short timer times
out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number
that matches the digitmap to the softswitches.
Indicates the prefix of the ephemeral termination. The default
prefix on Huawei softswitches is A100.
5 Web Page Reference
339