Huawei EchoLife HG8110 Service Manual page 149

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
Create GEM port 1 for carrying traffic streams of the ETH type and bind GEM
port 1 to T-CONT 4. Set the QoS mode to priority-queue (default).
NOTE
a. To change the QoS mode, run the qos-mode command to configure the QoS mode to gem-
car or flow-car, and run the gem add command to configure the ID of the traffic profile
bound to the GEM port.
b. When the QoS mode is PQ, the default queue priority is 0; when the QoS is flow-car,
traffic profile 6 is bound to the port by default (no rate limitation); when the QoS mode is
gem-car, traffic profile 6 is bound to the port by default (no rate limitation).
huawei(config-gpon-lineprofile-10)#gem add 1 eth tcont 4
Configure the service mapping mode from the GEM port to the ONT to VLAN
(default), and map CVLAN 10 to GEM port 1.
huawei(config-gpon-lineprofile-10)#mapping-mode vlan
huawei(config-gpon-lineprofile-10)#gem mapping 1 0 vlan 10
After the configurations are complete, run the commit command to make the
configured parameters take effect.
huawei(config-gpon-lineprofile-10)#commit
huawei(config-gpon-lineprofile-10)#quit
c. Configure an ONT service profile.
The number of ports configured in the service profile must be the same as the
actual number of ONT ports. The flowing table lists the port capabilities
ofHG8010/HG8110/HG8240/HG8245/HG8247/HG8447. The HG8247 is used
as an example.
Product
HG8010
HG8110
HG8240
HG8245
HG8247
HG8447
huawei(config)#ont-srvprofile gpon profile-id 10
huawei(config-gpon-srvprofile-10)#ont-port eth 4 pots 2 catv 1
After the configurations are complete, run the commit command to make the
configured parameters take effect.
huawei(config-gpon-srvprofile-10)#commit
huawei(config-gpon-srvprofile-10)#quit
d. (Optional) Configure an alarm profile.
– The ID of the default GPON alarm profile is 1. The thresholds of all the alarm
parameters in the default alarm profile are 0, which indicates that no alarm is
reported.
– In this example, the default alarm profile is used, and therefore the
configuration of the alarm profile is not required.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Number of Number of
ETH Ports POTS Ports
1 -
1 1
4 2
4 2
4 2
4 4
3 Configuration
Number of
CATV Ports
-
-
-
-
1
1
141