Configuring The H.248-Based Voice Service On The Web Page - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Step 7 Check the registration status of the voice user.
In the navigation tree, choose Status > VoIP Information. In the right pane, User Status is
Up.
----End
Result
l
l

3.4.6 Configuring the H.248-based Voice Service on the Web Page

This topic provides an example of how to configure the H.248-based voice service on the Web
page.
Prerequisite
l
l
l
Context
NOTE
Some voice parameters cannot be configured on the Web page but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see
the XML Configuration File (on the Web
Issue 02 (2011-12-08)
User 1 with telephone number 88001234 can call user 2 with telephone number
88001235, and the communication between them is normal. The communication is also
normal for user 2's calling user 1.
Check whether the voice communication between users using different ONTs is normal.
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
a GPON ONT (on the OLT
You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see
Locally Logging in to the Web
Two telephone sets must be available and each must be connected to ports TEL1 and TEL2
respectively on the ONT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enabling Layer 2 Service Channels Between an OLT and
CLI).
Interface.
Page).
3 Configuration
3.4.3
3.6.1 Operation Guide on
224