Restore Default Configuration; Ping Test - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Figure 5-46 Firmware Upgrade
2.

5.10.5 Restore Default Configuration

In the navigation tree on the left, choose System Tools > Restore Default Configuration. In
the pane on the right, click Restore Default Configuration to restore the factory defaults, as
shown in
Figure 5-47 Restore Default Configuration
Exercise caution when you perform this operation because it restores factory defaults.

5.10.6 Ping Test

In the navigation tree on the left, choose System Tools > Ping Test. In the pane on the right,
enter the destination IP address for the ping test in the IP Address text box, and then click
Start, as shown in
Issue 02 (2011-12-08)
version of the device. Click Update Firmware to upgrade the software of the device, as
shown in Figure 5-46.
After the upgrade is successful, a message is displayed indicating that the device needs to
be reset. Click Reset. The configuration data takes effect after the device is reset.
Figure 5-47.
CAUTION
Figure 5-48.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Web Page Reference
345