Huawei EchoLife HG8110 Service Manual page 179

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Issue 02 (2011-12-08)
b. Automatically find an ONT.
If the password or SN of an ONT is unknown, run the port portid ont-auto-
find command in the GPON mode to enable the ONT auto-find function of the
GPON port. Then, run the ont confirm command to confirm the ONT.
huawei(config)#interface gpon 0/1
huawei(config-if-gpon-0/1)#port 1 ont-auto-find enable
huawei(config-if-gpon-0/1)#display ont autofind 1
//After this command is executed, the information about all ONTs
connected to
the GPON port through the optical splitter is displayed.
---------------------------------------------------------------------
---
Number
F/S/P
Ont SN
Password
VenderID
Ont Version
Ont SoftwareVersion : V1R002C06
Ont EquipmentID
Ont autofind time
---------------------------------------------------------------------
---
Number
F/S/P
Ont SN
Password
VenderID
Ont Version
Ont SoftwareVersion : V1R002C06
Ont EquipmentID
Ont autofind time
---------------------------------------------------------------------
---
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth
6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth
6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10
NOTE
If multiple ONTs of the same type are connected to a port and the same line profile or service
profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered
ONTs in batches to simplify the operation and increase the configuration efficiency. For
example, the preceding command can be modified as follows:
huawei(config-if-gpon-0/1)#ont confirm 1 all sn-auth omci ont-
lineprofile-id 10 ont-srvprofile-id 10
c. (Optional) Bind an alarm profile to the ONT.
In this example, bind the default alarm profile, namely alarm profile 1 to the
ONT.
huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1
huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1
6. Confirm that the ONT goes online normally.
After an ONT is added, run the display ont info command to query the current status
of the ONT. Ensure that Control flag of the ONT is active, Run State is online,
Config state is normal, and Match state is match.
huawei(config-if-gpon-0/1)#display ont info 1 1
---------------------------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 1
: 0/1/1
: 6877687714852900
:
: HWTC
: 120D0010
: 247
: 2010-12-10 14:59:10
: 2
: 0/1/1
: 6877687714852901
:
: HWTC
: 120D0010
: 247
: 2010-12-10 14:59:12
3 Configuration
171