Install Sfp Module - Fujitsu 1FINITY L100 User Manual

Equipment Installation

Install SFP Module

4.15
Install SFP Module
The following links lead to related information:
Remove SFP Module
Danger: Never look into the end of a fiber-optic cable. Permanent eye damage or blindness can occur very
quickly if the laser light is present. Follow local safety precautions regarding fiber.
Danger: Never handle exposed fiber with bare hands or touch it to bare skin. Fiber fragments can enter
the skin and are difficult to detect and remove. Follow local safety precautions regarding fiber.
Step 1
Inspect the module for damage or debris, and remove the optical connector cover.
Step 2
Locate the PIU or blade into which the module is to be installed.
Step 3
If necessary, record the serial number and issue number of the module being installed.
Step 4
Install and secure the SFP module into the proper port on the front of the PIU or blade.
Warning: Do not push the module quickly into the slot (port) on the front of the PIU or blade. Seat the
module with a slow but firm motion to avoid damage to the module and slot (port).
Step 5
Are fibers to be connected to the module at this time?
If YES:
Continue with next step.
If NO:
Attach a protective dust cap on the optical receptacle. This procedure is complete.
Step 6
Clean the optical connectors.
Step 7
Connect the fiber-optic cables to the module.
✓
This task is complete.
·
Release 19.1.1 Issue 1.1, May 2021
151
Fujitsu and Fujitsu Customer Use Only