Fujitsu 1FINITY L100 User Manual page 14

Compliance Information—
General Industry
FCC
This equipment has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interferences when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio energy and if not installed in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, which the user will be required to correct at his/her expense.
Industry Canada
This digital apparatus does not exceed the Class A limits for noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications to
ICES-003.
CE Markings—
CE Certification
All 1FINITY systems meet all requirements for CE marking. It is compliant with the following standards:
■ 93/68/EEC (CE Marking)
■ 2014/30/EU (EMC Directive)
■ 2015/863 (RoHS Directive)
■ 2014/35/EU (Low Voltage Directive)
■ 2012/19/EU (WEEE Directive)
■ IEC 60950-1, IEC 60825-1, EN 60950-1, EN 60825-1 and all related requirement
■ Laser IEC/EN 60825-2 Standards
■ 21 CFR Chapter 1, Sub chapter J, Class 1 Laser Product
■ Class A Emission limits for the following standards:
• FCC Part 15, Class A (U.S.A.)
• ICES-003, Class A (Canada)
• CISPR Publication 32 Class A (Europe)
■ Product safety regulatory standards:
• UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment-Safety—Part 1: General Requirements)
• CAN/CSA C22.2 No. 60950-1-07, 2nd Edition, 2014-10 (Information Technology Equipment-Safety—Part 1: General Requirements)
• IEC 60950-1:2005 (Second Edition): Am1:2009 + Am2:2013
• IEC/EN 60825-1 (Safety of laser products—Part 1: Equipment classification and requirements)
• IEC/EN 60825-2 (Safety of laser products—Part 2: Optical fibre communication systems [OFCS])
Cet appareil numérique ne dépasse pas les limites d'émission de
bruit pour les appareils numériques de Classe A tel que définit dans
le document NMB-003 publié par le Département Canadien de
Communications.