L160 Raman Amplifier - Fujitsu 1FINITY L100 User Manual

Unit Description

L160 Raman Amplifier

2.4
L160 Raman Amplifier
The L160 Blade is a carrier-grade (C + L) backward Raman optical amplifier blade designed for high OSNR
performance and for the specific challenges of long-reach optical network spans. Currently, the L160 Blade can
be deployed with the L100 Blade. The operation of the L160 Blade is fully integrated with the L100 Blade, and
after it is installed, the L160 Blade functions as part of that NE. Hardware support for (C + L) amplification is built
directly into the blade. Currently, C-Band pumps support C-Band applications and configurations. In-service L-
Band amplification (C + L) can be added on the same blade in a future release.
The number of L160 Raman blades that can be installed depends upon the ROADM configuration.
Note: L100 Issue 14, FC95453R11-I14, and later blade must be used with L160 Raman blade.
Connector Descriptions
The following figures show front and rear view ports of the Raman blade.
1FINITY L160
ESD
FG
FC95453M21 Iss.01
Figure 20
Front View of L160 Raman Blade
MAINT
ESD
FG
Figure 21
Rear View of L160 Raman Blade
Table 25
Connector and Function
Connector Connector Type
E1 R LC with shutter
C1 T LC with shutter
MAINT RJ-45
·
Release 19.1.1 Issue 1.1, May 2021
C1 T E1 R
(LC)
(LC)
C1 E1
T R
CAUTION
HAZARD LEVEL 1M
FAN
1 2 3
Location
Front panel
Front panel
Rear panel
UTL 1, 2 USB
UTL 2
UTL 1 USB FIND SYS ALM RST
Function
Connection from line Receive fiber
Connection to L100 (BDL1-3R11) E1 R port
100/1000Base-T connection of maintenance port
Fujitsu and Fujitsu Customer Use Only
77