System Time And Date; Show System Time And Date; Set System Time And Date Manually; Configure Ntp - Fujitsu 1FINITY L100 User Manual

System Administration

System Time and Date

6.4

System Time and Date

In this section:
6.4.1

Show System Time and Date

6.4.2

Set System Time and Date Manually

6.4.3

Configure NTP

6.4.4 Configure System Time Zone
User can set system time and date in two ways: manually or through the network using NTP. Regardless of how
the user chooses to set system time and date, the user still needs to set the system time zone.
6.4.1
Show System Time and Date
Command:
> show system-state clock datetime
Output Example:
system-state clock datetime 2018-04-26T10:23:44
[ok]
6.4.2
Set System Time and Date Manually
Command:
> request set-current-datetime current-datetime <YYYY-MM-DDTHH:MM:SS>
Command Example:
> request set-current-datetime current-datetime 2018-04-26T10:23:44
Note: If the NTP is enabled, this operation fails with message status set-current-datetime is
unavailable when NTP is enabled.
6.4.3
Configure NTP
Show System NTP Configuration
Command:
% show system ntp
·
Release 19.1.1 Issue 1.1, May 2021
212
Fujitsu and Fujitsu Customer Use Only