Fujitsu 1FINITY L100 User Manual page 431

431
Equipment Removal
Remove Fan Unit
Step 2
Remove the Fan unit by performing the following substeps:
a) Locate the release lever on the lower left-side corner of the Fan unit to be removed.
b) Press the release lever to the right, and carefully and slowly pull on the cross bar to remove the Fan unit from
blade.
Cross Bar
Release Lever
Figure 171
Removing Fan Unit
Step 3
Set the Fan unit aside for paperwork processing, if required.
Step 4
If a new Fan unit is installed in the same position, follow the appropriate Fan installation procedure.
✓
This task is complete.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021