Equipment Removal
9
Equipment Removal
In this chapter:
9.1
Remove Filler Panel
9.2
Remove SFP Module
9.3
Remove Plug-In Unit
9.4
Remove Fan Unit
9.5
Remove Power Cables
9.6
Remove Blade from Rack
9.7
Remove Blade from Housing
The procedures described in this section are used to remove L100 Blades, PIUs, pluggable modules, and other
required equipment in 19- or 23-inch, 2- or 4-post racks or the 1FINITY Housing.
The following tools and equipment are required:
■ Common hand tools
■ DMM
·
Release 19.1.1
Issue 1.1, May 2021
423
Fujitsu and Fujitsu Customer Use Only