2
Installing the Cab Firewall
Parts needed for this procedure:
1
Cab firewall
Procedure
1.
Caulk the existing firewall openings on both
sides at the locations shown in
black RTV sealant.
1. Caulk these areas on both sides.
2.
Caulk the cab firewall at the locations shown in
Figure 8
with black RTV sealant.
Figure 7
Figure 7
with
g301598
1. Caulk these areas only
3.
Remove the existing hardware that connects the
existing firewall to the roll bar tube.
4.
Place the cab firewall around the seat and onto
the existing firewall
7
Figure 8
(Figure
9).
g336508