Step Mount; Carriage Bolt (3/8 X 7/8 Inch); Nut (3/8 Inch); Carriage Bolt (5/16 X 3/4 Inch) - Toro Groundsmaster 3200 Series Operator's Manual

5
Installing the Step
Parts needed for this procedure:
1

Step mount

2

Carriage bolt (3/8 x 7/8 inch)

2

Nut (3/8 inch)

2

Carriage bolt (5/16 x 3/4 inch)

1

Carriage bolt (5/16 x 1-1/4 inch)

3

Nut (5/16 inch)

1

Deck step

1

Floor mat

Procedure
1. Remove the existing step on the side of the
machine (Figure
Note:
The existing step does not need to be
installed when the cab is removed. Use the step
that comes with the cab.
Figure 17
1. Bolt
2. Step mount
17).
3. Nut
2. Install the deck step to the step mount with a
carriage bolt (5/16 x 1-1/4 inch) and a nut (5/16
inch). Refer to
3. Install the step to the side of the machine with
2 carriage bolts (3/8 x 7/8 inches), 2 nuts (3/8
inch), a carriage bolt (3/8 x 7/8 inch),and nut
(3/8 inch). Refer to
1. Carriage bolt (5/16 x 3/4
inch)
2. Step mount
3. Nut (5/16 inch)
4. Deck step
4. Install the floor mat into the cab
g302817
12
Figure 18.
Figure 18.
Figure 18
5. Carriage bolt (5/16 x 1-1/4
inch)
6. Nut (3/8 inch)
7. Carriage bolt (3/8 x 7/8
inches)
(Figure
g301516
19).