Toro Groundsmaster 3200 Series Operator's Manual page 17

1. Male coupler
2. Straight fitting (3/8 NPT x 5/8 barb)
3. Hose clamp
4. Dust cap
5. R-clamp
10. Apply pipe sealant to the threads on the engine
fittings.
11. Manually secure the engine fittings into the ports
until they are finger-tight.
12. Secure the engine fittings 2 to 3 additional turns
from finger-tight.
13. Slip the hose clamps over the hoses.
14. Insert the hoses over the barb ends of the
engine fittings and secure them with the hose
clamps (Figure 24).
Figure 24
6. Nut (1/4 inch)
7. Hose
8. Engine fitting
9. Direction of fluid flow
10. Carriage bolt (1/4 x 3/4 inch)
15.
16.
17
11. Female coupler
12. Female dust plug
13. Hose
14. Cable tie
15. Engine plug
Install the R-clamps around the hoses
24).
Secure the hoses to the back of the cab with 2
carriage bolts and 2 nuts
25).
g301830
(Figure
(Figure 24 and Figure