Philips CARDIOMD Service Manual page 279

Procedure
The Internet Protocol (TCP/IP) Properties
dialog appears.
4. Select the radio button Use the following
IP address.
5. Enter the IP address of the CardioMD
system, the Subnet mask and Default
gateway IP address.
Note. The IP addresses of the CardioMD
system, subnet mask and default gateway must
be provided by the institution's network
administrator.
6. Click OK.
7. In the Local Area Connection Properties
dialog, click OK again.
8. Reboot the acquisition PC.
Further information about local area network
setup is available in the Windows Help
system.
Setting Up the Processing Station IP Address
This section explains how to set up IP addresses for the processing station used with the
CardioMD system. This requires editing a file named
Procedure
1. In the Windows Start menu, select
Programs, Accessories, Notepad.
The Windows Notepad application starts.
2. In the Notepad window, select File, Open.
1MAN0158-H11 04-2005 CSIP Level 1
Details
Hosts
Details
on the acquisition PC:
CardioMD Service Manual 8-77
Installation