Philips CARDIOMD Service Manual page 256

Installation
20. Connect the power input connector of the
laptop power supply to the IEC connector
inside the arm.
21. Place the power supply inside the arm.
22. Mount the arm cover.
23. On the top plate, remove the 4 screws and
the cable bracket.
24. Mount the top plate using the two long
screws at the rear and the two shorter ones
for the front two holes.
Note. Make sure to mount the top plate with
the round air circulation holes to the left.
8-54 CardioMD Service Manual
1MAN0158-H11 04-2005 CSIP Level 1