Setting Up System Event Notifications; Set Up Instructions; Testing - ABB PCS100 AVC-20 User Manual

92 PCS100 AVC-20 User Manual
10.4.3

Setting Up System Event Notifications

The menu item "779 System events" under the Email service menu is used to configure and test the System Event
email notifications.
10.4.3.1

Set Up Instructions

Select the menu "7790 Email address" and enter the destination email address for the notifications to be
sent to.
Select the menu "7791 Trigger Type" and select desired event type to trigger the email. The three event
types are:
Trigger notification on Fault
–
Trigger notification on Warning
–
Trigger notification on Power Quality
–
Note: It is possible to select any or all of the event type options.
Select the menu "7793 Enable" and set it to true.
10.4.3.2

Testing

To test the System event email service, select the menu "7792 Force Email" and set it to true. This will attempt to
send out an email using the email server settings and the email address supplied in "7790 Email address".
Figure 10-12: Setup Page for System Event email notifications