Table of Contents
Advertisement
64
PCS100 AVC-20 User Manual
Parameter
779 System_Event
Function:
Allows operator to configure and test the System event email notifications.
Setting Up:
7790 Email Address: Destination email address for the system event email
7791 Trigger Type:
7792 Force Email:
7793 Enable:
Parameter
77A Service Log
Function
Creates a service log email that is sent out on the 1
the factory.
8.3.8
Menu Graphic display
8.3.8.1
Submenu A00 Display
A00 Display
The menu contains parameters to setup the graphic display module
Name:
Function:
Range:
Factory Setting:
Access:
Name:
Function:
Range:
Factory Setting:
Access:
Name:
Function:
Range:
Factory Setting:
Access:
Name:
Function:
Range:
Factory Setting:
Access:
notification to be sent to.
Gives the operator the option to choose the event that will
trigger an email. The options include:
–
Allows user to test the System event email notification service
when set to true. An email will be sent out using the email server
settings and the email address entered in 7790. Allow up to a
couple minutes for the email to be sent.
When set to true, this enables PQ event email notifications to be
sent to the operator.
A31 GDM Control Enable
Enables or disables the local Start, Stop, Reset control.
True / False
True
Operator
A62 Screen Saver Time
Sets the time for the screen saver to activate.
0 min to 999 min
15 min
Operator
A63 SSH Port Enable
Enables SSH access.
True / False
False
Operator
A64 Firmware Upload Enable
Enables firmware uploads
True / False
False
Operator
Table 8-8: Submenu A00 Display Parameters
Trigger notification on fault
Trigger notification on warning
Trigger notification on Power Quality
st
of every month. This is setup in
Advertisement
Table of Contents
