Open-Source Software; Power Termination Details - ABB PCS100 AVC-20 User Manual

120 PCS100 AVC-20 User Manual
Term
NC
NO
PCS100
PTC
SCM
Vcan
Vcanserver
VSIB
VT

17.5 Open-Source Software

This product incorporates software from open-source communities.
document 2UCD200000E041 PCS100 Open-Source Software Information.

17.6 Power Termination Details

The following table and drawings define the PCS100 AVC-20 Injection Transformer terminations - Customer
connections for supply and load. Following aberrations are used in descriptions:
TP Standard termination palm
TPI IEC termination palm option
TPN NEMA termination palm option
Power Modules
0B5
1B
02B
03B
04B
05B
06B
Description
Normally closed (Relay)
Normally open (Relay)
A generic range of ABB LV power converter products.
Positive Temperature Coefficient temperature sensor.
System Configuration Module. A small circuit board located inside the master module.
When the PCS100 product powers up the SCM checks the SW revisions and the
hardware configuration (i.e., the number of inverter and rectifier modules).
The name of the high-speed serial communications bus protocol used by the different
modules in the PCS100 products to communicate to each other. These modules are the
Master Module, Inverter Module, Rectifier Module, SCM and GDM.
The name of the driver software for the Vcan bus
Slave Stack Interface Board (located in an inverter or rectifier module)
Voltage Transformer or potential transformers (PT) for metering and protection in
high/medium-voltage circuits
400V
TP1
TP1
TP2
TP3
TP3
TP3
TP3
Table 17-2: PCS100 AVC-20 termination details
Table 17-1: Glossary
400V+TPI
TPI1
TPI1
TPI2
TPI2
TPI3
TPI3
TPI3
For more information refer to the
400V+TPN
TPN1
TPN1
TPN2
TPN2
TPN3
TPN3
TPN3