ABB PCS100 AVC-20 User Manual page 74

74 PCS100 AVC-20 User Manual
Code Origin Type
61 R, I F
62 R, I W/AB
63 M, R, I W/AB
64 R,I AB
65 I AB
66 M W
67 M, R, I W
68 M, R, I F
69 M F
70 M F
GDM Info Description
Transistor The inverter's (or rectifier's)
Case IGBT (Insulated Gate Bipolar
OverTemp Transistor) case
temperature is too hot
(over the limit).
Note: The temperature is
calculated using a thermal
model
Transistor The IGBT junction is too hot
Junction Hot (near limit).
Note: The temperature is
calculated using a thermal
model.
Copper Hot The choke winding is too
hot (near limit).
Note: The temperature is
calculated using a thermal
model.
Copper Over The choke winding is too
Temp hot.
Note: The temperature is
calculated using a thermal
model.
Bypass Over Long duration bypass over
Temp temperature detected.
Transformer Transformer is too hot.
Hot Note: The temperature is
detected by a thermistor in
transformer winding.
VCAN There is sustainable
Warning interference in the module
communications cables.
VCAN Error There was a non-
recoverable
communications error
between the master and the
inverter.
Rectifier Lost The Master controller lost
communications with
Rectifier module.
Inverter Lost The Master controller lost
communication with the
Inverter module.
Recommended Action
Ensure all module fans are
operating.
Ensure the ambient
temperature is not too high.
Ensure all module fans are
operating.
Ensure the ambient
temperature is not too high.
Ensure all module fans are
operating.
Ensure the ambient
temperature is not too high.
Ensure all module fans are
operating.
Ensure the ambient
temperature is not too high.
None
Ensure all module fans are
operating.
Ensure the ambient
temperature is not too high.
Ensure all communication
ribbon cables are connected
and not damaged.
If damaged, contact your ABB
Service Agent to have the
cables replaced.
Ensure all communication
ribbon cables are connected
and not damaged.
If damaged, contact your ABB
Service Agent to have the
cables replaced.
- Check ribbon cables between
modules
- Call service agent
Ensure all communication
ribbon cables are connected
and not damaged.
If damaged, contact your ABB
Service Agent to have the
cables replaced.